Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
ISO 14586 steel zn ptd. counters. head TX shape C
SCR-CS-ISO14586-C-TX30-(A2K)-6,3X32
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
 | |
Matière | Steel |
Finition | Zinc plated |
Conforme à la norme RoHS | Yes |
Form | C |
Diamètre nominal (d1) | 6.3 mm |
Länge (l1) | 32 mm |
Head diameter (dk) | 11.3 mm |
Hauteur de tête (k1) | 3.15 mm |
Empreinte intérieure | TX30 |
Type d’entrainement | Internal TX |
Forme de tête | Countersunk head |
Type de filetage | Self-tapping screw thread |
Thread design | Full thread |
Declaration of performance (EU-CPR) | No |
Forme de pointe | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Contact spray Oxidation solvent
S1PL ESD Carbon 290 safety shoe
VARIFIX® Standardfix hammer head fastener Pre-assembled with nut and washer, A4 stainless steel
Distance bushing set 3 pieces
Lamella flap disc stainless steel
1/2 inch socket wrench insert metric, hexagon, short
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
1-ear clamp with insert ring
1/2 inch impact socket wrench, inch, hex., short
Clip connector For wall and ceiling sander WSS 225-E Compact