Countersunk tapping screw shape C with H recessed head
DIN 7982 nick-ptd steel, countersnk head H shape C
SCR-CS-DIN7982-C-H2-(E2J)-3,5X16
Register now and access more than 125,000 products
- Self-tapping screws are screws that form their own thread. These screws form their own counter thread when screwed into a prefabricated core hole.
- Reference values for selecting the correct core-hole diameter are included in DIN 7975.
- Form C = Gewinde mit Spitze
Datasheets(X)
 | |
Material | Steel |
Surface | Nickel plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 6.9 mm |
Head height (k1) | 2.1 mm |
Internal drive | H2 |
Drive type | H |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Declaration of performance (EU-CPR) | No |
Shape of tip | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Bracket set for variable wooden rear wall DWD XP
Hand sanding pad assortment 3 pieces
Glazing packer
Expander tool for drop-in anchors, without visual installation control
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Button-head rivet
Refill container for vacuum brake bleeder
Standard exhaust air filter For dry vacuum cleaner TS 12
Bolt for furniture connector SM 10
Ear defenders Cessna CAP