Core drill DS 180-T
Core drill DS 180-T
CREDRL-EL-(DS 180-T)
Register now and access more than 125,000 products
- The aluminium housing with a T-handle ensures optimum weight distribution for horizontal drilling by hand
- Perfect work progress with all approved drill sizes thanks to the powerful motor with 3-speed gearbox and multi-colour LED load indication
- The soft start function cuts the speed in half for 10 seconds, making drilling into surfaces much easier
- Personal safety is ensured by the integrated PRCD-S circuit breaker
- Various drill bit mounts can be used because the machine spindle has a combined tool chuck with ½-in female and 1 ¼-in male threads
- Continuous visual monitoring of the water supply during wet drilling thanks to the supplied hose piece with water flow indicator
- Longer service life due to electronic overload protection, as the motor speed is reduced six times electronically in the event of overload
- The pulsating power reduction and optical warning from the LEDs give a warning to the operator. Then the motor switches off automatically in order to protect the motor. Unlike with a thermal protection function, however, the drill can be switched on again immediately
Datasheets(X)
Hand and stand-guided wet drilling in reinforced and non-reinforced concrete
Hand and stand-guided dry drilling in bricks, perforated bricks, clinker bricks, sand-lime bricks and aerated concrete
Breakthrough drill holes in plumbing and electrical applications
Nominal voltage | 230 V/AC |
Power input | 2400 W |
Idle speed 1st gear max. | 780 rpm |
Idle speed 2nd gear max. | 1690 rpm |
Idle speed 3rd gear max. | 3520 rpm |
Min./max. drilling diameter in 1st gear, wet | 70-180 mm |
Min./max. drilling diameter in 2nd gear, wet | 35-70 mm |
Min./max. drilling diameter in 3rd gear, wet | 8-35 mm |
Length | 430 mm |
Width | 295 mm |
Height | 405 mm |
Weight of machine | 6.8 kg |
CASEINRT-(DS180-P/-T)
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
1-ear clamp with insert ring
Pneusil repair set
Half-shell pin crimping insert
Classic trousers
Sweatshirt STRONG REFLEX
Flat blade fuse MINI Silver
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Halogen-free threaded connector LH IP67
Crimping pliers set
Die-cast zinc base