Cooler anti-freeze 50% organic G12++/G13 and SiOAT
Radiator anti-freeze G12++
RADANTIFREZ-ORG-50%-(G12++)-PINK-5LTR
Register now and access more than 125,000 products
- Diluted refrigerant for direct use in cars, trucks and industrial machinery
- Does not contain any nitrite amine, phosphate and borate
- Anti-cavitation
- Does not leave any dirt in the cooler circuit
- Protects all parts of the cooling circuit
- Releases the heat in an atmospheric way
- Increases boiling point and lowers freezing point
- Prevents foam
The boiling point values of the system depend on the pressurisation of the cooling circuit. Higher pressure means higher boiling points.
Würth certifies that the freezing points have been measured in certified measuring centres in accordance with the legal standards. We would like to point out that small measurement deviations may occur depending on the references of the anti-freeze and the measuring instruments used. The only reliable measurement for the freezing temperature is carried out under laboratory conditions in a cold room specially designed for anti-freeze measurement.
The instructions for use are a recommendation on the basis of tests carried out by us and our experience; perform your own tests before each application. Due to the large number of applications, storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service team provides technical information or acts as a consultancy service, no responsibility is taken by this service, except where the advice or information falls within the scope of our specified, contractually agreed service or the advisor has acted intentionally. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development to the products.
Datasheets(X)
G12++/G13/SiOAT
Product weight (per item) | 5650 g |
Density/conditions | 1.075 g/cm³ / at 20°C |
Weight of content | 5550 g |
Colour | Pink |
Chemical basis | Ethylene glycol |
Contents | 5000 ml |
Shelf life from production/conditions | 60 Month / at 5°C to 30°C |
Last viewed
Guide drill bit A014C For adapter A2
Halogen-free threaded connector LH IP67
Twist drill bit HSS DIN 340 type RN 130°
Metric double open-end wrench DIN 3110/ISO 1085
Flexible tool clamp For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Twisted rod For rivet nut setting pliers HES 510
Premium spade chisel with SDS-max drive arbour
Support Plate For 115 and 125 mm diameter flexible sanding discs with ceramic abrasive grain
Countersunk tapping screw type C with H recessed head ISO 7050, shape C, zinc-plated, blue passivated (A2K), with H cross recess
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head