Contact glue MASTIK 800
Contact adhesive MASTIK 800
CNTCTADH-NPREN-(MASTIK800)-1LTR
Register now and access more than 125,000 products
- Fast initial adhesion.
- High-strength gluing.
- Resistance to atmospheric agents, steam and detergents.
- Temperature resistance up to +80°C.
- Optimal application, excellent brushability, increasing the yield per m2.
Apply this product in open, well-ventilated areas. Protect from possible sources of ignition.
Datasheets(X)
Gluing of plastic foils, formica, melamine, wood veneers, cork, on materials such as chipboard and woods in general.
The surface to be glued must be clean, dry and free of grease. Remove the product before use, until a perfect homogenisation is achieved.
Apply glue to both surfaces. After applying the product, wait until both surfaces are dry to the touch.
Once this time has elapsed, join the parts and press evenly according to the strength of the materials.
Storage
In the original container and at room temperature (+20°C) approx. 12 months. Clean with acetone.
| Technical data | |
| Backing | Polychloroprene |
| Appearance | Pine yellow |
| Viscosity | 2400 mPas |
| Performance | Approx. 400 g/m2 |
| Thermal resistance | + 80° C short-term + 100° C |
| Application temperature | From + 15°C to + 30°C |
Last viewed
Tile levelling rod
WÜPOFAST® zinc-plated blue chipboard screw
Triangular blade
Hydraulic trolley jack RH-6 With a robust frame construction and a load capacity of 6,000 kg
Eccentric fitting Without collar
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Half-shell hexagon crimping insert
Oil binder Basic