Connecting sleeve
Connecting sleeve, standard, centre stop
CONSLEV-CU-(J2N)-4,0SMM-25MM
Register now and access more than 125,000 products
- With centre stop
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 4 mm² |
Length (l) | 25 mm |
Diameter (d) | 3.6 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Reduction, nickel-plated brass
Pin punch
Coal shovel with wooden handle
Raised contersunk head tapping screw, C shape with PH recessed head DIN 7983, A4 stainless steel, plain. With cross recess.
Hexagonal bolt with shank and fine thread DIN 960, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)
WÜPOFAST® A2 chipboard screw A2 stainless steel, full thread, raised countersunk head, PZ
1/2" socket wrench insert For TX screws, long
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Roller partial extension