Concrete screw W-BS Compact type P with pan head - ANC-(W-BS/P-COMPACT)-TX30-(A2K)-3-6X28

Concrete screw W-BS Compact type P with pan head

Name: Concrete screw W-BS Compact type P with pan head
Brand: Würth
SKU: 5929506028

Concrete screw W-BS/P Compact
ANC-(W-BS/P-COMPACT)-TX30-(A2K)-3-6X28

Art.-no. 5929506028

EAN 4053479843452

All versions

Prices for customers after login

Concrete screw W-BS Compact type P with pan head

Art.-no. 5929506028

Prices for customers after login

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Easy to install using a cordless screwdriver. Avoids hitting reinforcement due to very low embedment depth. For concrete, with pan head, zinc-plated steel

Quick, easy installation

Can be assembled by hand

Economical and efficient mounting solution

3 different head diameters for a versatile application

Type P with pan head dia. 14 mm

Type SP with extra-small pan head dia. 10.5 mm

Type LP with extra-large pan head dia. 17.6 mm

Proof of Performance

European Technical Assessment ETA-15/0091 for anchors in a redundant non-structural system in concrete:

Static and quasi-static load

Fire resistance: R30, R60, R90, R120

Tensile capacity in hollow core concrete slabs - expert report no. 21641 - 2016

Notice

It is preferable to install the W-BS Compact manually

If a cordless drill driver is used for assembly, at least five preliminary tests should be performed on location to ensure the correct drill driver settings and to prevent over-tightening of the W-BS Compact. It is recommended that you start with the drill driver's lowest torque setting and increase it if necessary

Do not use a tangential impact driver for installation

Application area

Lightweight mounting rails

Create the drill hole

Clean the drill hole

Position anchor

Screw in anchor

European Technical Assessment ETA-15/0091 for anchors in a redundant non-structural system in concrete:

Static and quasi-static load

Fire resistance: R30, R60, R90, R120

Tensile capacity in hollow core concrete slabs - expert report no. 21641 - 2016

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Anchors in a redundant non-structural system, with European Technical Assessment:

In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)

Fastenings under exposure to fire

Suitable for mounting low loads in concrete:

Economical and efficient mounting solution for many electrical, plumbing and HVAC applications or attachments that have to be demountable:

Type P: Mounting of metal profiles, mounting rails, vernier hangers, sheet metal, etc. in in-place installation

Type LP with large pan head: Mounting attachments such as mounting rails, profiles, sheet metal, etc. if a large contact surface is required

Type SP with small pan head: Mounting attachments such as metal multiple cable holders, cable clamps, pipe clamps, cable clips, ceiling hangers, profiles, brackets, etc.

W-BS Compact (zinc-plated steel) may only be used in dry indoor conditions.

Type description	W-BS Compact type P
Anchor size	6 mm
Thread diameter	7 mm
Anchor length (l)	28 mm
Head type	Pan head
Head diameter	14 mm
Max. attachment height (t fix)	3 mm
Internal drive	TX30
Nominal drill-bit diameter (d 0)	6.0 mm
Drill hole depth (h 1)	28 mm
Surface	Zinc plated
Material	Steel
Embedding depth (h nom)	25 mm
Minimum component thickness (h min)	80 mm
Through-hole in the component to be connected (d f)	8.0 mm
Approval	ETA-15/0091
Drill cutting diameter (d cut)	6.40 mm

Performance data in concrete - anchors in a redundant non-structural system in accordance with ETA-15/0091
Anchor size	[mm]	6
Nominal length of thread engagement	h_nom [mm] ≥	25
Admissible load in all load directions in cracked and uncracked concrete C20/25 to C50/601	F_zul [kN] =	0,43
Permissible bending moment	M_zul [Nm]	7,9
Admissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-15/0091
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of _γF = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Appendix C, for information on combining tensile and transverse loads, influence of the edge distance and groups of anchors.

Installation parameters in concrete
Anchor size		6
Spacing	s_cr,N [mm]	200
Edge distance	c_cr,N [mm]	150
Minimum member thickness	h_min [mm]	80
Length of anchor in drilled hole	h_nom ≥ [mm]	25
Fixture thickness	t_fix[mm] =	l-h_nom
Nominal drill diameter	d₀ [mm]	6
Cutting edge diameter	d_cut ≤ [mm]	6,35
Drill hole depth	h₁ ≥ [mm]	28
Through hole in the component being connected	d_f ≤ [mm]	8
Mounting torque	T_inst [Nm]	10

Additional accessory:

Product

Description

Quantity

Price
/PU

C 6.3 TX bit (1/4 inch)

BIT-TX30-RED-1/4IN-L25MM

Art.-no. 06143130

Short design for all common TX screw sizes

x 5 pcs

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D6,0-L165-WL100MM

ZEBRA

Art.-no. 0648056016

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

VARIFIX<SUP>® </SUP>c-assembly rail 26/18

VARIFIX® c-assembly rail 26/18

MNTRL-C-26/18-TH1,25-2M

VARIFIX

Art.-no. 0862001001

Various mounting options with extensive system components

x 10 m

Suction bell

CONTAINMENTCAP-F.BLWOUTPMP

Art.-no. 0903990010

Vacuum cleaner adapter for extracting drilling dust when drilling or cleaning holes

Cordless drill driver ABS 12 COMPACT M-CUBE

DRLDRIV-CORDL-(ABS12 COMPACT)-2X2AH

MASTER M-CUBE

Art.-no. 5701101002

Extremely compact and powerful cordless drill driver for general drilling and screwing applications

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).