Concealed beam connector - CON-WO-HIDDEN-70X125MM

Concealed beam connector - CON-WO-HIDDEN-70X125MM - 1

Concealed beam connector - CON-WO-HIDDEN-70X125MM - 2

Concealed beam connector

Name: Concealed beam connector
Brand: Würth
SKU: 0681352125

Concealed beam connector
CON-WO-HIDDEN-70X125MM

Art.-no. 0681352125

EAN 4045727934234

All versions

Prices for customers after login

Concealed beam connector

Art.-no. 0681352125

Prices for customers after login

Quantity

x 10 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

This innovative concealed beam connector with high load-bearing capacity and low installation depth is ideal for concealed wood/wood connections (visible areas) of secondary beams to main beams or posts

Sloping connections can be constructed at angles of 15° to 165° and gradients of 0° to 55°. Screw into grain-cut timber at an angle of 35° using ASSY 5 x 80 mm countersunk-head, full-thread screws. The screw-in angle is determined by the sheet metal guide.

High load-bearing capacity coupled with low installation depth (14 mm)

Conical, swallow tail-style geometry for self-centring and gap-free contact pressure

High level of possible pre-fabrication in the workshop and easy and quick on-site installation

Sheet metal hot-dip zinc-plated on both sides (S250GD + Z275 [approx. 20 µm]), thickness 3.0 mm in line with EN 10346:2009

Application in utilisation class 1 and 2 in line with EN 1995:2013

Proof of Performance

ETA-09/0301

Notice

It is advisable to use the corresponding milling template set for easy and quick pre-assembly.

Screw into grain-cut timber at an angle of 35°. The screw angle is determined by the shape of the tabs.

The main beam's transverse strength must be verified separately. If necessary, the joint should be made using ASSY plus VG full-thread screws. For loads perpendicular to the secondary beam axis, the transverse strength must also be verified for the secondary beam. If the main beam is subject to torsion, it must be secured against twisting.

Available work documents:

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

Application area

Instructions

Select a template insert

Attach template: The fixing holes are used to attach the template to the beam.

Set the trimming depth of 14 mm

Mill the recess

The upper thrust ring enables a simple and fast milling process without damaging the template.

Mark center of secondary beam.

Place the swallow tail-shaped part of the connector centrally on the previously marked secondary beam and screw in the centring screw first of all. The connector must be mounted flush with the upper edge

Then screw in the remaining screws at a 35° angle.

Fit the connector
into the prepared recess
in the main beam and
screw in the screws.

Hook the secondary beam into main beam from above

Simple mounting thanks tocentering aid.

ETA-09/0301

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Load-bearing connections of timber joists to timber main beams or posts in visible areas

Instructions

Approved fasteners:

ASSY 3.0 countersunk head screw with full thread 5 x 80 to 120 mm (lg ≥ 72 mm) in line with ETA 11/0190 mm

Installation guide:

Select the template insert

Place the swallow tail-shaped part of the connector centrally on the previously marked secondary beam and screw in the centring screw first of all. Mount the connector flush with the upper edge

Screw in the remaining ASSY screws at an angle of 35°

Fit the connector in the prepared recess of the main beam and screw in the screws

Fit the secondary beam into main beam from above


Width x height	70 x 125 mm
Min. beam cross-section of subcarrier	95 x 180 mm
Installation depth	14 mm
Diameter of hole	5.5 mm
Number of holes in subcarrier nJ + main carrier nH	7 + 14 PCS
Weight	350 g
Approval	ETA-09/0301
Thickness	3 mm
Material	Steel
Material designation	S250GD
Surface	Hot dip galvanized
Material standard	DIN EN 10346:2009

Solid wood C 24	F_y,k	1,61	2,26	2,56	3,20
Solid wood C 24	F_x,k	3,58	5,46	6,27	7,86
Glued laminated timber GL 24h	F_z,k	9,20	13,21	15,20	19,08
Glued laminated timber GL 24h	F_y,k	1,69	2,37	2,69	3,36
Glued laminated timber GL 24h	F_x,k	3,58	5,59	6,57	8,24
Factor table for design values
2	0,462	0,538	0,615	0,692	0,846
Notes: Design in accordance with ETA-09/0301 and DIN EN 1995-1-1 The regulations and instructions of ETA-09/0301 must be observed. The transverse tension must be verified separately. The main beam must be secured to prevent torsion These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Installation depth		14 mm	14 mm	14 mm	14 mm
Number of screws on secondary beam + main beam		5 + 11 pcs	7 + 14 pcs	8 + 15 pcs	10 + 17 pcs
Solid wood C 24	F_z,k	8,78	12,60	14,50	18,20
Solid wood C 24	F_y,k	1,61	2,26	2,56	3,20
Solid wood C 24	F_x,k	3,58	5,46	6,27	7,86
Glued laminated timber GL 24h	F_z,k	9,20	13,21	15,20	19,08
Glued laminated timber GL 24h	F_y,k	1,69	2,37	2,69	3,36
Glued laminated timber GL 24h	F_x,k	3,58	5,59	6,57	8,24
1	0,462	0,538	0,615	0,692	0,846
2	0,462	0,538	0,615	0,692	0,846
Notes: Design in accordance with ETA-09/0301 and DIN EN 1995-1-1 The regulations and instructions of ETA-09/0301 must be observed. The transverse tension must be verified separately. The main beam must be secured to prevent torsion. These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Minimum cross-section of the secondary beam - 75°		100 x 140 mm	100 x 180 mm	100 x 200 mm	100 x 240 mm
Installation depth		14 mm	14 mm	14 mm	14 mm
Number of screws on secondary beam + main beam		5 + 11 pcs	7 + 14 pcs	8 + 15 pcs	10 + 17 pcs
Solid wood C 24	F_z,k	8,78	12,60	14,50	18,20
Solid wood C 24	F_y,k	1,61	2,26	2,56	3,20
Solid wood C 24	F_x,k	3,58	5,46	6,27	7,86
Glued laminated timber GL 24h	F_z,k	9,20	13,21	15,20	19,08
Glued laminated timber GL 24h	F_y,k	1,69	2,37	2,69	3,36
Glued laminated timber GL 24h	F_x,k	3,58	5,59	6,57	8,24
1	0,462	0,538	0,615	0,692	0,846
2	0,462	0,538	0,615	0,692	0,846
Notes: Design in accordance with ETA-09/0301 and DIN EN 1995-1-1 The regulations and instructions of ETA-09/0301 must be observed. The transverse tension must be verified separately. The main beam must be secured to prevent torsion. These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Additional accessory:

Product

Description

Quantity

Price
/PU

Flush milling cutter for wood with ball bearing above

CTR-SL-TC-S8-20X60MM

Art.-no. 0612208203

For flush milling and copying templates with spacing ring above in soft and light wood, compact and hard wood and sheet materials

x 1 pcs

Milling template set

MILTEMPLT-SET-F.WOCON

Art.-no. 0681352300

Milling template and four template inserts for quick, precise pre-fabrication of 14 mm recess for concealed beam connectors.

x 1 pcs

Template insert

TEMPLTINRT-F.WOCON-70X90MM

Art.-no. 0681352301

Replacement template for milling template set for creating recesses for concealed beam connectors

x 1 pcs

Template insert

TEMPLTINRT-F.WOCON-70X125MM

Art.-no. 0681352302

Replacement template for milling template set for creating recesses for concealed beam connectors

x 1 pcs

Template insert

TEMPLTINRT-F.WOCON-70X150MM

Art.-no. 0681352303

Replacement template for milling template set for creating recesses for concealed beam connectors

x 1 pcs

Template insert

TEMPLTINRT-F.WOCON-70X190MM

Art.-no. 0681352304

Replacement template for milling template set for creating recesses for concealed beam connectors

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).