Compressor oil WK 100

Name: Compressor oil WK 100
Brand: Würth
SKU: 0893050506

Compressor oil, WK100
PNOIL-WK100-1LTR

Art.-no. 0893050506

EAN 4053479388052

All versions

Similar products

Prices for customers after login

Compressor oil WK 100

Art.-no. 0893050506

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Reliable lubrication of air compressors

Universally applicable for all types of air compressors

Exceeds DIN 51506, VDL

Highly reliable lubrication

Highly resistant to ageing

Contains additives to protect against corrosion and wear

Optimum protection against corrosion, even when compressing wet media

Excellently suited for Würth compressors

Notice

Only suitable for bearing lubrication on turbo-compressors.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For lubricating piston and rotary compressors up to a compression temperature of +220°C.

Contents	1000 ml
Container	Bottle
Colour	Transparent
Smell/fragrance	Characteristic
Chemical basis	Mineral oil
Shelf life from production	36 Month
Pour point	-9 °C
Density	882 kg/m³
Min. flashing point	270 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.