Welcome to Würth Canarias For trade customers only
Combination joist hanger, 2.5 mm for beams with large cross-sections - JOISTHNG-(EXCRANKED)-220X260X2,5 Combination joist hanger, 2.5 mm for beams with large cross-sections - JOISTHNG-(EXCRANKED)-220X260X2,5 Combination joist hanger, 2.5 mm for beams with large cross-sections - JOISTHNG-(EXCRANKED)-220X260X2,5
Combination joist hanger, 2.5 mm for beams with large cross-sections - JOISTHNG-(EXCRANKED)-220X260X2,5 - 1
Combination joist hanger, 2.5 mm for beams with large cross-sections - JOISTHNG-(EXCRANKED)-220X260X2,5 - 2
Combination joist hanger, 2.5 mm for beams with large cross-sections - JOISTHNG-(EXCRANKED)-220X260X2,5 - 3

Combination joist hanger, 2.5 mm for beams with large cross-sections

Combination joist hanger 2.5 mm
JOISTHNG-(EXCRANKED)-220X260X2,5

Art.-no. 0681220260
EAN 4038898014430
All versions

Prices for customers after login
Combination joist hanger, 2.5 mm for beams with large cross-sections

Art.-no. 0681220260

Prices for customers after login
Quantity
PU
x 10 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Heavy-duty design
  • Robust one-piece joist hanger (angled outwards) for load-bearing connection of timber joists to wood, concrete or steel.

  • High load capacity

  • Wings angled outwards

  • Sheet metal hot-dip galvanised on both sides (S250GD +Z275) approx. 20 μm in line with EN 10326:2004

  • Application in utilisation classes 1 and 2 in line with EN 1995:2013
Proof of Performance

European Technical Approval ETA-08/0264

Notice

The diameter of bolts/screws may only be max. 2 mm smaller than the diameter of the hole.


The respective basic conditions of the applicable anchor approval must be observed.

European Technical Approval ETA-08/0264

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Load-bearing connection of timber joists to wood, concrete or steel.

Instructions

Suitable fasteners:


  • Ribbed nail in line with EN 14592: 4.0x40–100 mm

  • Bolts in accordance with manufacturer's specifications: d = 12 mm

  • Recommended dowels for anchoring in concrete: W-BS; W-FAZ; W-VIZ; WIT-VM 250; WIT-UH 300

Width x height

220 x 260 mm

Thickness

2.5 mm

Number of D 5 mm holes in subcarrier nJ + main carrier nH

32 + 50 PCS

Number of D 13 mm holes in subcarrier nJ/main carrier nH

0 + 6 PCS

Weight

1202 g

Depth of underside

61 mm

Material

Aluzinc structural steel, 1.0242

Surface

Hot dip galvanized

Width of wing on nut

41 mm

Approval

ETA-08/0264

Material designation

S250GD

Number of pieces

1 PCS

Depth of upper side

61 mm

Characteristic load capacities in kN of Würth combination joist hanger 2.5 mm; partial and complete nailing; (Ƥk = 350 kg/m³)
Art. no.Format in mmComplete nailingPartial nailing
Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60
4x404x604x404x604x404x604x404x604x404x604x404x60
Characteristic load-bearing capacities of Würth combination joist hanger 2.5 mm with Würth ASSY 3.0 joist hanger screws (Ƥk = 350kg/m³)
Art. no.Format in mmComplete screw connectionPartial screw connection
Fz,down,RkFz,up,RkFy,Rk/e = 0Fz,down,RkFz,up,RkFy,Rk/e = 0
5x405x505x405x505x405x505x405x505x405x505x405x50
Art. no.Format in mmComplete screw connectionPartial screw connection
Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60
5x405x505x405x505x405x505x405x505x405x505x405x50
Characteristic load capacities of Würth combination joist hanger 2.5 mm with Würth ring-shank nails (Ƥk = 350 kg/m³)
Art. no.Format in mmComplete nailingPartial nailing
Fz,down,RkFz,up,RkFy,Rk/e = 0Fz,down,RkFz,up,RkFy,Rk/e = 0
4x404x604x404x604x404x604x404x604x404x604x404x60
0681 180 220180/22040,460,139,755,816,625,620,130,619,730,19,013,9
0681 220 260220/26054,073,053,368,720,732,126,638,726,234,610,416,2
0681 160 200160/20013,320,012,618,712,017,57,210,96,910,26,59,5
0681 180 220180/22015,924,215,222,814,621,48,613,28,312,47,911,7
0681 200 240200/24018,628,417,926,917,225,49,915,19,514,39,113,5
0681 220 260220/26020,030,619,329,118,627,710,115,49,714,79,414,0
0681 160 200160/20050,856,146,651,427,732,229,632,725,428,015,017,4
0681 180 220180/22059,365,455,160,833,639,033,937,429,632,718,321,4
0681 200 240200/24067,874,863,570,139,546,038,142,133,937,420,924,3
0681 220 260220/26072,079,567,874,842,749,838,142,133,937,421,625,3
0681 160 200160/20024,928,622,525,620,423,113,515,512,213,911,112,5
0681 180 220180/22030,435,127,731,725,328,816,719,215,217,313,915,8
0681 200 240200/24036,141,633,037,930,434,619,122,017,520,116,118,4
0681 220 260220/26039,345,436,241,633,538,319,923,118,421,117,019,4
0681 160 200160/20033,651,432,847,213,921,417,026,116,625,77,611,6
0681 200 240200/24047,568,746,764,619,329,923,335,022,934,410,315,9
NOTE:
These are guides for planning purposes. The values must be calculated for each project by authorised persons.
Characteristic load-bearing capacities in kN of Würth combination joist hanger 2.5 mm; partial and complete nailing; (rk = 385kg/m³)
Art. no.Format in mmComplete nailingPartial nailing
Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60
4x404x604x404x604x404x604x404x604x404x604x404x60
Characteristic load-bearing capacities of Würth combination joist hanger 2.5 mm with Würth ASSY 3.0 joist hanger screws (rk = 385kg/m³)
Art. no.Format in mmComplete screw connectionPartial screw connection
Fz,down,RkFz,up,RkFy,Rk/e = 0Fz,down,RkFz,up,RkFy,Rk/e = 0
5x405x505x405x505x405x505x405x505x405x505x405x50
Art. no.Format in mmComplete screw connectionPartial screw connection
Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60Fy,Rk/e = 20Fy,Rk/e = 40Fy,Rk/e = 60
5x405x505x405x505x405x505x405x505x405x505x405x50
Characteristic load-bearing capacities of Würth combination joist hanger 2.5mm with comb/anchor nails (rk = 385kg/m³)
Fz,down,RkFz,up,RkFy,Rk/e = 0Fz,down,RkFz,up,RkFy,Rk/e = 0
4x404x604x404x604x404x604x404x604x404x604x404x60
0681 180 220180/22047,264,446,459,819,629,623,635,023,132,210,616,1
0681 200 240200/24055,273,754,369,022,834,627,239,926,836,812,118,3
0681 220 260220/26062,078,358,473,724,437,230,941,429,236,812,318,8
0681 160 200160/20015,522,914,721,213,819,78,412,48,011,57,510,7
0681 180 220180/22018,727,717,725,916,924,210,115,19,614,19,213,2
0681 200 240200/24021,832,620,930,619,928,811,617,311,116,210,615,3
0681 220 260220/26023,535,222,633,321,631,411,817,811,416,810,915,9
0681 160 200160/20055,159,350,554,430,034,232,234,627,629,716,218,5
0681 180 220180/22064,369,259,764,336,441,636,839,632,234,619,922,8
0681 200 240200/24073,579,168,974,242,749,041,444,536,839,622,625,8
0681 220 260220/26078,184,073,579,146,253,041,444,536,839,623,426,9
0681 160 200160/20027,030,424,327,222,124,514,616,413,214,712,013,3
0681 180 220180/22033,037,330,033,627,430,518,020,416,418,415,016,7
0681 200 240200/24039,144,335,840,232,936,820,723,419,021,317,519,5
0681 220 260220/26042,548,339,244,236,340,621,624,519,922,418,420,6
Art. no.Format in mmComplete nailingPartial nailing
0681 160 200160/20039,555,238,650,616,424,620,030,119,627,68,913,4
NOTE:
These are guides for planning purposes. The values must be calculated for each project by authorised persons.
Partial and complete nailing of Würth combination joist hanger 2.5 mm
Factor table for rated values
Parameters of the Würth combination joist hanger 2.5 mm according to ETA-08/0264
Art. no.Format w/h (mm)Width (mm)Height (mm)Complete nailingPartial nailing
nH (Qty)nJ (Qty)kH,1kH,2e1 (mm)e2 (mm)nH (Qty)nJ (Qty)kH,1kH,2e1 (mm)e2 (mm)
NKLContinuouslyLongMediumShortShort/very shortVery short
10,4620,5380,6150,6920,7690,846
20,4620,5380,6150,6920,7690,846
0681 160 200160/200160200382254,052,259174631201226,926,127392595
0681 180 220180/220180220422667,465,570915672221432,731,833063148
0681 200 240200/240200240463082,380,183706820241639,038,039253755
0681 220 260220/260220260503296,594,297578075261645,844,845994415
Notes:
  • Design according to ETA-08/0264 and DIN EN 1995-1-1

  • The regulations and instructions of ETA-08/0264 must be observed.

  • The transverse tension must be verified separately.

  • The main beam must be secured to prevent torsion
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X75MM

Galvanised steel, blue coated (A2K)
x 250 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details