Combi fibreglass ladder
Fibreglass multi-purpose ladder 2 pcs w. traverse
MULTIPURPLDR-FBRGLS-H2,8M-2X5RUNGS
Register now and access more than 125,000 products
- Material: fibreglass-reinforced polyester resin.
- High mechanical hardness and resistance to moisture, acids, corrosion, ultraviolet rays etc.
- Fibreglass ladder with folding section. Suitable for use as a single-section or standing ladder.
- Manufactured according to UNE-EN 131 and UNE-EN 50528 standards.
- Insulators resistant to electrical and thermal agents - they do not transmit voltage, heat or cold.
- Lower traverse with non-slip rubber pads, ensuring comfort and safety at work.
- Rungs with large non-slip bearing surface. Increased stability.
- The rungs remain in the horizontal position during operation for increased safety.
- Top three rungs in red and inverted to indicate maximum climbing height.
- A2 stainless-steel fittings.
- Robust.
Datasheets(X)
The soles of shoes and the rungs of the ladder must be free of any non-slip substances.
Secure the hinge in the chosen position with the "click" self-locking mechanism.
The stability of the ladder must be ensured. Floor support should always be on the rubber pads and not on the traverse.
Material | PES - Polyester |
Number of rungs | 2 x 5 |
Load capacity | 150 kg |
Max. standing height as standard ladder | 2.8 m |
Max. working height as standard ladder | 1535 mm |
Max. reaching height as standard ladder | 1535 mm |
Last viewed
Crimp cable lug, ring shape Polyamide insulated
Segment bow handle
Brake fluid tester
Consolidating impregnation for construction
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Single wire seal (SEAL) For uninsulated cable connector
Linen sanding belt Aluminium oxide
Hexagonal cap nut, high profile DIN 1587, steel 6, plain