Collated nail UMA 221/10
Nail collated UMA 221/10
NL-(UMA221/10)-MG-72MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. thickness 5 mm):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
10 collated high-quality universal nails for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) compliant with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Number of nails | 10 |
Shaft length (SL) | 72 mm |
Shank diameter (Øds) | 3.7 mm |
Length of magazine (LG) | 93 mm |
Suitable for device type | Würth BST MA-75, Hilti DX 350, Hilti DX 36M, Hilti DX 460, Hilti DX5, Hilti DX 6 |
Last viewed
1/4 inch socket wrench insert, metric short
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Hose coupling hose piece
Threaded fuse MEGA
Polishing pads
Multi-line laser MLPG 22
Profile cylinder measuring key, type B
Threaded sleeve For Stapa-Gewinde-WESF steel-armoured pipe
Timing tool set 2 pieces, for FCA Group 1.6 ECO 105 HP, petrol
Thread mandrel