Closed-end blind rivet, dome head ISO 15975 dome head aluminium/aluminium
ISO 15975 flat head aluminium/aluminium
RIV-ISO15975-ALU/ALU-(5,0-6,5)-3,2X11,0
Register now and access more than 125,000 products
"ISO-standardised" closed-end blind rivet
The dimensions and tolerances defined in EN ISO 15975 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 3.2 x 11 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. grip range | 5.0-6.5 mm |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
ISO | 15975 |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 460 N |
Tensile fracture load | 540 N |
Head type | Dome head |
Last viewed
Flanging tool
Refills for construction markers in impact-resistant magazine
Professional step ladder Würth
1/2 inch socket wrench insert metric, hexagon, short
1/4-inch angled extension
Toggle anchor W-KD with washer and hexagon nut, zinc-plated steel
A 402 door handle
Combination sponge
Sanding Plate D 150 mm For ETS 150-E twin random orbital disc sanders
Contact spray SW