Cleaning gel TOPCLEANER AQUA
Cleaning gel TOPCLEANER AQUA
UNICLNR-(TOPCLEANER-AQUA)-1KG
Register now and access more than 125,000 products
Features
- Product especially recommended for difficult stains such as grease, oil, soot, industrial dirt of different kinds, air pollution, tread marks, chewing gum, salt stains and lime embedded in absorbent bases.
- Cleaner for all types of surfaces inert to alkalinity such as natural and artificial stone, ceramic tiles, stoneware, mortar, concrete, noble metals, stainless steels etc.
- Thanks to its viscosity, it can be used for cleaning vertical as well as horizontal surfaces.
Advantages
- 1-component product, ready to use.
- Water-based product, solvent-free.
- High cleaning capacity for stains embedded in the surface.
Benefits
- Excellent cleaning power.
- Biodegradable product, compliant with EC Regulation No. 648/2004 on detergents.
Do not mix with acidic products.
Metal surfaces of weak alloys such as aluminium or galvanised metal, or plastic surfaces or paints with low resistance to alkalinity can be damaged by using Topcleaner Aqua.
Before cleaning, always use plastic to protect surfaces that should not be treated, especially surfaces sensitive to alkalinity.
Can strip protective coatings, varnishes and paints.
May change the tone of white stone after the cleaning process.
Always carry out a pre-test in an inconspicuous area.
These data are only recommendations based on our experience. Testing prior to use is recommended. For more information, see the product data sheet.
Datasheets(X)
For cleaning façades, interiors, parking areas, pavements, workshops, machinery, warehouses, workshops, airports, leisure centres, restaurants, hotels and kitchens, and for use in the food industry and industry in general.
Concentrated product especially suitable for stains embedded in absorbent bases. For cleaning large surfaces we recommend pollution cleaner AG 46 art. no. 0893585760.
Mix the product thoroughly before applying until a homogeneous paste is obtained.
Apply a good quantity of the product with a synthetic bristle brush on the affected base, activating the product with an initial, un-rinsed brush.
Depending on the degree of soiling, leave to work for 1 to 4 hours. Once the paste has dried, rinse with water and brush (better with pressurised water). Hot water can shorten the stripping and rinsing time.
Repeat the application if the stains are very persistent. Allow to dry before proceeding with other treatments.
Consumption
Approximate size 200-500 ml, depending on the degree of soiling and type of surface.
Contents | 1 l |
Chemical basis | Alkaline tenside |
Colour | Pearl light grey RAL 9022 |
Density | 1.13 g/cm³ |
Density conditions | 0 - not applicable |
Weight of content | 1.13 g |
Shelf life from production | 24 Month |
Conditions to maintain shelf life from production | cool and frost-free storage |
Last viewed
Telescopic levelling staff
1/2-inch impact socket wrench insert hexagon, metric, long
Assembly for fastening objects indoors, for loads up to 1.5 T
1/4 inch cardan joint
1/2 inch socket wrench insert metric, hexagon, short
Open-ended wrench
Low-strength hydraulic sealant
Elbow, electrically conductive For ISS and TSS series
Screw cap W.TEC® COVER CAP WP 800 For pipe thread
Cutting disc for steel and stainless steel