Cleaner Agriculture
Special cleaner for agricultural use
CLNR-TRACT-SPECIAL-5L
Register now and access more than 125,000 products
- Removes mineral dirt (copper, sulphur residues), corrosion, lime, cement, as well as traces of grease and dirt.
- Restores shine on aluminium and stainless steel surfaces.
Depending on the severity of the dirt, apply undiluted or with a max. 5% dilution. (1:20) The cleaner should be mixed into the water and not vice versa.
Datasheets(X)
To clean the exterior of agricultural equipment and machinery, nebulisers, sprayers, vats, nozzles and filters.
Mix with clean water. Always wear a mask, goggles and gloves. Spray the surface to be treated, leave for 10 to 30 minutes to take effect, rinse with plenty of water under pressure. Do not allow the product to dry on the affect area. Repeat the procedure if contamination is severe. On vertical surfaces, apply from bottom to top to prevent staining.
Contents | 5 l |
pH value | <1 |
Mixing ratio | 1:1 - 01:20 |
Last viewed
Catch bolt With bail plate
O-ring, metric
ASSY® 4 HCR 1.4539 CS stainless steel screw Stainless steel highly corrosion resistant 1.4539 plain partial thread countersunk head
Hexagon Socket Head Cap Screw
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
Thin sheet metal screw Savetix® with hexagon socket
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Blind rivet, flat head
Cap For round eyelet
Tapping screws, pan head assortment 1,550 pieces