Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X40
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 7 mm |
Length (l1) | 40 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752, DIN 1481 |
Last viewed
End cap For aluminium recessed handle, C shape, closed, horizontal
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Ejector Tipmatic For Nexis Impresso 100°/110° concealed hinge, no auto function
Pan head tapping screw, shape C with AW drive
Valve mounting tool
Brake piston resetting adapter
Sabre saw blade, wood, one star For hardwood and softwood
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
REDOSLIDE Z60-HNT/Z100-HNT interior sliding door fitting for ceiling mounting
Hexagon nut, type B/S DIN 934 steel, zinc plated blue, with washer, in accordance with DIN EN ISO 7089 (DIN 125), steel, zinc plated blue