Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X30
Art.-no.
04757 30
EAN 4038898014720
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
Notice
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Product information
Datasheets(X)
 | |
Nominal diameter (d1) | 7 mm |
Length (l1) | 30 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752, DIN 1481 |
Last viewed
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Nitrile chemical protective glove Long, heavy-duty design
Heating Nozzle
Peltor Optime III 3M ear defenders
Setting tool for W-SD impact anchor
Cutlery insert
Adhesive remover
Universal helmet mount For LED torches with explosion protection
Sleeve cone
Brake fluid tester