Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-12X80
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 12 mm |
Length (l1) | 80 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Concealed hinge, TIOMOS click-on 110/37 A With integrated damping, three damping settings available
Paint gun SATA MINIJET 3000 B HVLP
Spirit level made of light metal
Hand pump with hose
High Power battery
Wood connector plate
Hexagon nut DIN 934, A2 stainless steel, plain
Hook and loop fastener support plate For dust-free working and optimum results
Turnbuckle
Silicone fluid silicone spray