Clamping mandrel For cutting discs and grinding discs
Clamping mandrel for cutting and grinding disc
MNDRL-CUTDISC-D10-(0-8MM)-SHFT6MM
ZEBRA
Register now and access more than 125,000 products
Clamping range from 0–8 mm
Just one clamping mandrel for all clamping ranges.
Clamping screw is completely countersunk in clamping mandrel
No protruding thread sections, enabling work even in cramped spaces.
Clamping screw with large contact surface and right-hand thread (self-clamping effect)
Reliable holding of wheels.
Clamping screw with large support surface and lengthwise slit
Easy to loosen or tighten with a 17 mm open-ended spanner or slotted screwdriver.
Datasheets(X)
Suitable for bore diameter | 10 mm |
Length | 58 mm |
Shank diameter | 6 mm |
Last viewed
Stretch X S1P safety sandals
Hard hat SH 2000-S
Pneumatic air multi-port distributor extension For installing a compressed air system
Round head screw with square neck and nut Similar to DIN 603, steel 4.8, zinc-plated with washer and nut
1-ear clamp with insert ring
Soft wax
TX double box-end wrench
1-component combination foam PU for roof tiles
Timing tool set 3 pieces, for VW Group 1.4, petrol
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain