Clamping lever with male thread in reinforced design
Clamping lever, steel, male thread, reinforced
CLMPLEVR-ET-ST-RFCD-M10X36X50
Register now and access more than 125,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into the place automatically.
 | |
Werkstoff Griff | PA reinforced - Polyamide reinforced |
Material of screwing thread | Steel |
Surface of the screwing thread | Burnished |
Conforme à la norme RoHS | Yes |
Design | Strengthened design |
Thread type x nominal diameter (d1) | M10 |
Shank diameter (d2) | 16 mm |
Head diameter (dk) | 22 mm |
Length of lever (l1) | 89 mm |
Thread length (lg) | 50 mm |
Height (h1) | 54 mm |
Hauteur de tête (k) | 36 mm |
Radius (r1) | 78 mm |
Farbe | Black |
Product weight (per item) | 85.900 g |
Type de filetage | Metric thread |
Last viewed
Shoe O2 NEW ATLAS
1/4 inch socket wrench insert, metric short
Ridge and hip roll WÜTOP® DV ridge
Laser distance meter WDM 2-18
Pipe collar type RK II
Metric combination wrench with POWERDRIV®
Nylon expanding socket For system bolt with M6 thread
Gun ADVANCE W18
Chipboard screw Wüpofast ® 2.0
Flat paintbrush For solvent-based lacquer and paint systems