Clamping lever with male thread
Clamping lever, steel, male thread, slim
CLMPLEVR-ET-ST-M8X36X20
Register now and access more than 125,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into the place automatically.
 | |
Material of handle | PA reinforced - Polyamide reinforced |
Material of screwing thread | Steel |
Surface of the screwing thread | Zinc plated |
RoHS-compliant | Yes |
Design | Slender |
Thread type x nominal diameter (d1) | M8 |
Shank diameter (d2) | 15 mm |
Head diameter (dk) | 20 mm |
Length of lever (l1) | 75 mm |
Thread length (lg) | 20 mm |
Height (h1) | 49.7 mm |
Head height (k) | 36 mm |
Radius (r1) | 65 mm |
Colour | Black |
Product weight (per item) | 27.800 g |
Thread type | Metric thread |
Last viewed
Filling station connector with handle
FPM/ECO/AR/ECO petrol hose with low permeation for fuel-carrying applications
Heat shrink hose, medium-walled
Spare loop For tyre tags
Plug-in nipple Series 2000
TX bit C 6.3 (1/4 inch) with hole
Active X S1 safety shoes
Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun
Spacer disc
Hard-pressed compact fleece disc With fabric plate