Clamp W-QUICLIP PLUS
Clamp W-QUICLIP PLUS
CLMP-(DIGA-CS-2/3)-LOKA-(15-18)
Register now and access more than 125,000 products
- Lockable clips
- High retention forces
- Temperature resistance from -25°C to +80°C (up to +110°C for short periods)
- Can be installed with a variety of gas nailers
- Easy side attachment on DIGA® CS 2 gas nailer
- All sizes can secure a variety of pipe diameters
- Material: Polyamide 6
- Through hole ∅ 5 mm, which also allows conventional attachment using nail anchors or chipboard screws
With application approval ETA-18/0957 in combination with nails according to ETA-21/0702 and ETA-21/0703
Datasheets(X)
For fast securing of plastic auxiliary installation pipes with light compressive strength, plastic armoured pipes with medium to high compressive strength and steel-armoured pipes in accordance with DIN EN 50086-1 on concrete substrates (normal weight concrete ≥ C 20/25 ≤ C40/50) in accordance with DIN EN 206 in sand-lime brick, solid brick and steel.
 | |
Material | PA 6 - Polyamide |
Colour | Grey |
Baseplate length (A) | 24 mm |
Baseplate width (B) | 16 mm |
Distance from centre of pipe to support (C) | 23 mm |
Min./max. grip range (ØD) | 14-18 mm |
Halogen-free | Yes |
Silicone-free | Yes |
Min./max. temperature resistance | -25 to 80 °C |
Last viewed
Sheet metal nut, type 2 Open screw-in area
Plus Quadro-L Vario hammer drill bit
Chipboard screw Wüpofast ® 2.0
TX bit with hole
Wiring duct
Plastic handle with HSS round cutting blade
Bow saw blade with raker toothing
1/4" multi-socket wrench insert bi-hex, multi profile
Sheet metal nut, type 1
Fuse holder For flat blade fuses with covers