Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-12X1,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 12 mm |
Suitable for groove diameter | 11.5 mm |
Internal diameter (d1) | 11 mm |
Eye width (a1) | 3.3 mm |
Width (b1) | 1.8 mm |
Thickness (s1) | 1 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Shim ring DIN 988, steel, plain
Tapping and chipping hammer BMH 45-XE
Coupling wrench for Storz A, B and C connections
Hand rivet tool combination assortment 15 pieces
Metric combination wrench with POWERDRIV®
Hexagon socket screw-in nut, tapered thread, imperial DIN 906, A4 stainless steel, plain
Assembly trestle "borriqueta"
Rivet nut with flat head and partial hexagon shank
Pipe cable lug with inspection hole