Chipping hammer MH 10-SE
Chipping hammer, MH 10-SE
CHPNGHAM-EL-(MH10-SE)-W.CHISEL
Register now and access more than 125,000 products
Long service life
Specially hardened tool mount, optimized dust seal and high-performance motor with high power reserve.
High removal power
Approx. 490 kg of concrete in 60 min.
Protects joints
Vibration-dampened ergonomic handle
Infinitely adjustable impact rate
Control electronics enable continuous adjustment of the impact rate, even under load.
Consistent impact rate and impact force
Constant electronics
Information on carbon change
The light indicates that carbon should be changed approx. 8 working hours in advance.
Motor damage as a result of eroded carbon is prevented.
Carbon brushes cut out automatically
Effortless work
The 12 lockable chisel settings allow adjustment to any working angle.
Maximum electrical safety
Full insulation
Easy tool insertion
Thanks to the automatic mount, the tool only needs to be inserted and rotated to lock.
Easy to use
Large on-off push switch
Datasheets(X)
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Protection class | Protection class II/protective insulation |
Power input | 1500 W |
Power output | 950 W |
Tool holding device | Suitable for SDS-max |
Weight of machine | 10.1 kg |
Cable length | 4 m |
Last viewed
Restrictor, 20 mm
Twist drill bit HSCo DIN 338 type RN MFD VARIO
Reversible blade
1/2 inch socket wrench insert metric, hexagon, short
Windscreen Wiper for Commercial Vehicle Heavy Duty
DUO wire end ferrule With plastic sleeve
Hexagonal bolt with flange
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Apparatus castor with fixed holder
Steel nail with riveted washer and discontinuous longitudinal corrugation