Chipboard screw Wüpofast ® 2.0
WÜPOFAST 2.0 steel zinc-plated FT counters. head Z
SCR-CS-WO-RT-Z2-(A2K)-3,5X18/14
Register now and access more than 125,000 products
The screw that bites
Flat countersunk head
- Suitable for wood and fittings
- Screws into fittings without damaging the coating
End mill (size 5 x 70 mm)
- 40 % reduction in friction when screwing in
- Reduced use of power tools (longer service life)
Normal thread/coarse thread
- Normal thread pitch on small screws, for improved sealing in chipboard
- Coarse thread for quick screwing
End mill incorporated in the reamer
- Less effort required when screwing in due to reduced friction
- Reduced development of cracks
Needle tip
- Provides optimal hold without slipping
- Continious thread
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Easy insertion/centring
- Excellent adhesion
- Improved drive precision
Datasheets(X)
 | |
Nominal diameter (d) | 3.5 mm |
Length (l) | 18 mm |
Head type | Countersunk head |
Head diameter (dh) | 6.9 mm |
Head height (k) | 2.1 mm |
Internal drive | Z2 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Thread length (lg) | 14 mm |
Core diameter | 2.1 mm |
Shape of tip | Pinpoint |
Angle of the tip | 23 Degree |
Material | Hardened steel |
Surface | Zinc plated |
Product weight (per item) | 0.880 g |
Area of application | Fitting, Body, Furniture, Universal |
RoHS-compliant | Yes |
Last viewed
NP profile half cylinder In 6-pin system
Soft-close door damper For Nexis Impresso concealed hinge
Torpedo spirit level
Clamping Mandrel For 1 or 2 nylon non-woven abrasive discs
Cordless secateurs
Hand tap, taper tap HSS DIN 352
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
12-V manual sander
Rope, mast anchorage Basic
ASSY ® 3.0 HCR chipboard screw