Cargo engine oil SHPD 15W40 E7
Engine oil CARGO SHPD 15W-40 E7
ENGOIL-MULTI-15W40-SHPD-205LTR
Register now and access more than 125,000 products
Long drain lubricant (LD)
Total base number, TBN = 15 mg KOH/g.
Prevents cylinder corrosion
Uses an additive with a sulphur content greater than 0.5% (5000 ppm).
Increases maintenance intervals
Compared to regular maintenance using oil of the same quality with a lower TBN and with no risk to the engine.
Dispersant with anti-oxidant properties
Protects against waste build-up and prevents filter clogging.
Wear-resistant properties
High solvency power
Protects the pistons and reduces sediment build-up.
Anti-corrosive, anti-oxidant and anti-foaming
Meets the requirements of all major manufacturers
ACEA E7 (Replaced E5 and E3)
API CI-4
CUMMINS 20071-20072-20076-20077-20078
MAN 3275
Global DHD-1
MACK EOM PLUS
MB 228.3
MTU Type II
RVI RD/RD-2/RLD/RLD-2
VOLVO VDS-3
Datasheets(X)
SHPD lubricant for diesel engines: "Super High Performance Diesel". All turbocharged or atmospheric European, American or Japanese diesel engines that are low-emission, Euro II, Euro III, equipped with EGR or older technologies: lorries, cars, construction equipment, agricultural machines and marine engines. Recommended for traditional or state-of-the-art engines.
Contents | 205 l |
Type of oil | Mineral |
Viscosity grade | 15W-40 |
Approved for engine oils | ACEA B4-04, ACEA E7 |
Recommended applications for engine oils | ACEA E7, API CI-4, Caterpillar ECF-1-a, Cummins 20076, Cummins 20077, Cummins 20078, Mack EO-M Plus, MAN M3275-1, MB 228.3, Renault RLD-2, Volvo VDS-3 |
Shelf life from production | 24 Month |
Density | 6.9 g/cm³ |
Density conditions | at 20°C |
Shelf life from production/conditions | 24 Month / at 5°C to 30°C |
Last viewed
Swivel sleeve For manual riveting tool
Handle for system case
1/2 inch socket wrench insert metric, hexagon, short
Hydraulic trolley jack RH-6 With a robust frame construction and a load capacity of 6,000 kg
System box
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Contact spray
1/2-inch socket wrench insert, TX head For external TX screws, short
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
HSS annular cutter