CERALINE matting body
Matting body CERALINE
MATBDY-COMBI-G80/60-EXC-40X25X6
ZEBRA
Register now and access more than 125,000 products
Effective and very long-lasting
Ceramic abrasive grain for a well-defined grinding finish (brushed finish) and a very long service life.
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required grinding finish with quick and shoulder-free results.
Simple assignment of fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing tempering colour. For forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 40 x 25 x 6 mm |
Design | Extra-coarse |
Colour | Orange |
Max. rotation speed | 9000 rpm |
Max. recommended rotation speed | 7500 rpm |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Hexagon nut ISO 4032, A4-70 stainless steel, plain, for pressure container construction
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
OBX-3000 RR cover angle For 3D mounting elements
Hollow-ceiling anchor W-HD
Specialist saw blade
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Earth pipe clamp, copper For conductor cross-sections up to max. 16 mm²
Blind rivet, flat head
Pump for 4500-ml hand cleaner
Twist drill bit HSS DIN 338 type RN 118°