CERALINE Longlife & Speed lamella flap disc
Lamella flap disc CERALINE
FLPDISC-LL-ST/A2/ALU-CG-CLT-SR-G120-D125
CERALINE
Register now and access more than 125,000 products
Extremely high and very fast material removal rate with cool grinding
High-performance abrasive grain and active grinding top layer
Very long service life and low contact pressure
High-performance ceramic grain
- Max. circumferential speed 80 m/s
- Recommended rotation speed 7,500 rpm
- Work only with appropriate protective equipment, such as safety goggles, gloves, hearing protection etc.
- Free of iron, chlorine and sulphur (≤ 0.1 %)
Complies with the highest safety requirements of European Standard EN 13743 and the OSA (Organization for Safety of Grinding Tools)
Datasheets(X)
- For grinding of edges, deburring, plastering, smoothing and processing weld seams.
- For stainless steel, rust-, acid- and heat-resistant steels (high-alloyed), steel and aluminium
- For freehand grinding with electric and pneumatic angle grinders.
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | 120 |
Design | Straight |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12250 rpm |
Max. recommended rotation speed | 7500 rpm |
Material of abrasive medium | Ceramic grain |
Last viewed
Anchor rod sold by the meter zinc-plated steel
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Furnace putty 1000
System insert 4.4.1, socket wrench 1/4 inch
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Key rosette pair AL 30
wSafe® 4000 pneumatic safety coupling With male thread
ORS 142 smoke switch For closing sequence controls and hold-open devices
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated