CERALINE Longlife & Speed cutting disc For steel and stainless steel
Cutting disc CERALINE
CUTDISC-CG-LS-ST/A2-SR-TH1,0-BR22,23-125
CERALINE
Register now and access more than 125,000 products
- Maximum working comfort
- Very large safety buffer
- Extremely low thermal load
- Low contact pressure
- Hardly any reworking necessary
- Considerably less stress on the user
- Store in a dry place at 20°C room temperature
- Work only with appropriate protective clothing
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting - increased risk of breakage!
- Ensure proper contact pressure
- Always clamp cutting discs (straight design) with metal ring towards the power tool
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organization for the Safety of Abrasives)
Datasheets(X)
- Particularly suitable for steel and stainless steel
- Optimum cutting properties, particularly in very hard and demanding workpieces as well as solid materials
- Equally able to cut thick and thin materials such as pipes, solid materials, flat materials etc.
Versatility (points system) | 3 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 4 of 4 points |
Cut quality (point system) | 4 of 4 points |
Diameter | 125 mm |
Thickness | 1.0 mm |
Drill hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 12250 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Countersunk head screw with recessed head Z DIN 965, A2 stainless steel, plain
Thread die HSS DIN EN 22568 for standard metric ISO threads
Plastic end grommet For rigid electrical conduits
Adapter for topping up leak detection additive
Segmented Grinding Disc For Stainless Steel
Vehicle dry abrasive paper strip RED PERFECT®
Lamp key For LED Euro warning lamps and LED warning lamps
Quick-action chuck Metal sleeve
Metric double open-end wrench DIN 3110/ISO 1085
Rivet nut with a small countersunk head and knurled shank