Burnishing roller
Burnishing Roller Sanding Fleece
SNDROLL-FLC-G100-100X50MM
Register now and access more than 125,000 products
- With 6 mm keyway and 19 hole for surface grinding machines
- Medium hardness
- Synthetic corundum
- Synthetic resin-bound sanding segments
- Produces impressive surfaces on stainless steel, copper, aluminium, brass etc. Also for cleaning oxide coatings and for smoothing plastics and wood.
- Circumferential speed: Specified by the machine used, but no more than 30 m/s = 3700 rpm
General working instructions: At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wear.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Attention: Pay attention to the running direction! Tools are only suitable for clockwise rotation.
Datasheets(X)
Produces impressive surfaces on stainless steel, copper, aluminium, brass etc. Also for cleaning oxide coatings and for smoothing plastics and wood.
Materials to be processed: Forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood.
Diameter x width x drill hole | 100 x 50 x 19 mm |
Grid size | 100 |
Material to be processed | Cr-Ni and other stainless steels, C-steel, Grey cast iron, Wood, Non-ferrous metal, Steels bands, Malleable cast iron, Deep-drawn steel, Injection-moulded zinc, Forged steel |
Last viewed
Tiomos comfort marking gauge
Smartboard Tavinea Optima For Vionaro/Nova Pro Scala
ELMO® connection terminal, screwless, compact For single-wire rigid copper conductors
Replacement blade For smoothing planes
Fixanchor internal thread W-FAZ-IG/A4 - push-through installation
Twisted rod For rivet nut setting pliers HES 510
Wood patches
Combi hexagon tapping screw with captive washer
Adapters For hammer core drill bit
Pressure cylinder lift 117 mm