Brass anchor
Brass anchor
DWL-BRS-M8-10X30
Art.-no.
090438
EAN 4011231849456
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Female thread with metric thread as an inexpensive alternative for outdoor use, for concrete and solid brick
- Knurled surface for good grip
- Screwing a screw/threaded rod with a metric thread causes the anchor to expand and anchor to the substrate
- Corrosion-resistant
- Low anchoring depth
- Small edge and axial clearances
- Suitable for push-through and cotter-pin installation
- Can be applied without setting tools
Drill the hole
Clean the drill hole
Knock in anchor until flush
Mount component
Product information
Datasheets(X)
Application area
- For secondary fastening indoors and outdoors
- For fastening components to concrete and solid brick
- For spaced mounting in conjunction with a threaded rod
Internal diameter | 8 mm |
Anchor length (l) | 30 mm |
Embedding depth (h s) | 30 mm |
Drill hole depth (t) | 35 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Centre-to-centre distance (a) | 80 mm |
Edge clearance (a r) | 80 mm |
Minimum component thickness (d) | 70 mm |
Hole diameter in component (d Bau) | 8.5 mm |
Max. attachment height (d a) - condition | Dependent on screw length |
Outer diameter | 10 mm |
Performance data | ||||||||
Anchor diameter [mm] | M4 | M5 | M6 | M8 | M10 | M12 | ||
Recommended Tensile load | Concrete ≥ C20/25 | Frec. [kN] | 0,45 | 1,00 | 1,40 | 1,90 | 2,50 | 3,45 |
Solid brick | 0,40 | 0,70 | 1,10 | 1,40 | 1,65 | 2,00 | ||
Solid sand-lime brick | 0,40 | 0,75 | 1,20 | 1,50 | 1,75 | 2,40 | ||
Recommended transverse load | Concrete ≥ C20/25 | Frec. [kN] | 0,40 | 0,90 | 1,20 | 1,90 | 2,50 | 3,50 |
Solid brick | 0,35 | 0,65 | 1,00 | 1,40 | 1,65 | 2,00 | ||
Solid sand-lime brick | 0,35 | 0,65 | 1,00 | 1,50 | 1,75 | 2,40 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!