BoxBolt® hollow profile fastener
BoxBolt steel zinc plated hexagon head
HLSECTFSTNR-BOXBOLT-(5-25)-(A2K)-M12
Register now and access more than 125,000 products
Never exceed the permissible working loads. Before using hollow section fasteners, always check that the steel structure can withstand the required loads.
With general technical approval Z-14.4-482
Art. no.: 04858061 does not have technical approval
BoxBolt® is a registered trademark of Access Technologies Limited, GB.
Datasheets(X)
CAD data (available after login)
For fastening to hollow sections or other hard-to-reach components. The fastener is especially suitable for applications where the installation point is only accessible from one side.
The connection is produced by tightening the screw while bracing the sleeve collar, resulting in expansion of the sleeve. The tightening torques can be applied using a torque spanner. The hollow section fastener is only approved for one-time use!
We recommend the BoxSokTM special tool for installation.
Thread type x nominal diameter | M12 |
Screw length (l) | 55 mm |
Width across flats (S) | 18 mm |
Width across flats, sleeve (SHü) | 26 mm |
Sleeve diameter (dHÜ) | 19.5 mm |
Collar thickness (kHü) | 8 mm |
Sleeve length (lHü) | 45 mm |
Min./max. grip length (lk) | 5-25 mm |
Nominal drill hole diameter | 20 mm |
Tightening torque | 80 Nm |
Min. hole distance (A) | 50 mm |
Min. edge clearance (B) | 18 mm |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!