BoxBolt^® hollow profile fastener

Name: BoxBolt ® hollow profile fastener
Brand: Würth
SKU: 04858083

BoxBolt steel zinc plated hexagon head
HLSECTFSTNR-BOXBOLT-(28-66)-(A2K)-M8

Art.-no. 04858083

EAN 4047376322936

All versions

Similar products

Prices for customers after login

BoxBolt^® hollow profile fastener

Art.-no. 04858083

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Galvanised steel, blue passivated (A2K). The mechanical material properties of the screws correspond to strength class 8.8 in accordance with DIN EN ISO 898-1.

Notice

Never exceed the permissible working loads. Before using hollow section fasteners, always check that the steel structure can withstand the required loads.

With general technical approval Z-14.4-482

Art. no.: 04858061 does not have technical approval

BoxBolt^® is a registered trademark of Access Technologies Limited, GB.

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

For fastening to hollow sections or other hard-to-reach components. The fastener is especially suitable for applications where the installation point is only accessible from one side.

Instructions

The connection is produced by tightening the screw while bracing the sleeve collar, resulting in expansion of the sleeve. The tightening torques can be applied using a torque spanner. The hollow section fastener is only approved for one-time use!

We recommend the BoxSok^TM special tool for installation.


Thread type x nominal diameter	M8
Screw length (l)	90 mm
Width across flats (S)	13 mm
Width across flats, sleeve (S_Hü)	22 mm
Sleeve diameter (d_HÜ)	13.5 mm
Collar thickness (k_Hü)	6 mm
Sleeve length (l_Hü)	80 mm
Min./max. grip length (l_k)	28-66 mm
Nominal drill hole diameter	14 mm
Tightening torque	25 Nm
Min. hole distance (A)	35 mm
Min. edge clearance (B)	13 mm
Material	Steel
Surface	Zinc plated
RoHS-compliant	Yes

Nominal diameter	Maximum working load in kN¹
	Permissible tensile load	Permissible shear load
	F_t,adm.¹	F_v,adm.¹
M6²	5.71²	16.21²
M8	14,14	18,57
M10	27,71	32,57
M12	32,36	42,50
M16	57,50	77,86
M20	101,43	127,86
¹Working loads F_t,adm. = F_t,R,d/γ_F or F_v,adm. = F_v,R,d/γ_F (partial safety factor of the effects γ_F = 1.4). In cases of the simultaneous occurrence of tensile and shear forces, observe the information in DIN EN 1993-1-8, table 3.4. ²Nominal dia. M6 without DIBt National technical approval

Required accessory:

Product

Description

Quantity

Price
/PU

BoxSok™ bolt socket head

PLGINTL-3/8ZO-HEX-WS13

Art.-no. 071413 50

Special tool for mounting BoxBolt^® hollow profile fastener

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).