Bottom lock piece For sill
Lock piece for door sill
LOKPCE-F.DRSILL-SILV-R-U29-13
Register now and access more than 125,000 products
- The contact pressure of the inactive leaf can be adjusted via an eccentric fitting AF 3 ± 1.5 mm
Not for use with Eifel TB sill system.
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
 | |
Suitable for | Guard width 20 mm, Double, rebated wooden house doors |
Type of assembly | Screw-on |
Suitable for rebate clearance | 4 mm |
Dimension between axes | 13 mm |
Contact pressure adjustment | +/- 1,5 mm |
DIN direction | DIN R/L |
Material | Steel / Die-cast zinc |
Surface | Anodised |
Colour | Silver coloured |
Gloss level | Matt |
Resistance class | RC 2 suitable (system check required) |
Width (B) | 29 mm |
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Vulcanised non-slip mat
Hand cleansing paste for workshops, 20 L
Screw fitting
Concealed hinge, TIOMOS Impresso 120
Lock nut DIN 7967, zinc-plated steel, blue passivated (A2K)
Hand tap, taper tap HSS DIN 352
Construction site circular saw blade For rough work on construction sites
Connector for guide rail
Hexagon nut with fine thread DIN 934, A2 stainless steel, plain