Bolt M8 BFB 8 BFB 8 DIN EN 206
Stud M8 for concrete BFB 8
STUD-CONC-BFB8-LT15-LS27-M8
Register now and access more than 125,000 products
Practical tip:
- To prevent the connection between the bolt and the mounting substrate being overloaded by torsion forces, the corresponding female thread must be screwed tightly using a torque wrench
- Recommended tightening torques:M6/M8
- Concrete surfaces: 4 Nm/6 Nm
- Steel surfaces: 6 Nm/8 Nm
All bolts are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (Ls) | 29 mm |
Shank diameter (Øds) | 4 mm |
Thread length (metric thread) (Lg) | 10 mm |
Thread type x nominal diameter | M8 |
Suitable for device type | Würth BST 350 |
Last viewed
Hard hat SH 2000-S
Head lashing system For inner roof supports
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Cordless hand-held circular saw AHKS 18-68 COMPACT M-CUBE
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Paper roll Hand towel
Guide rail for circular saw
Vehicle dry abrasive paper disc RED PERFECT®
Bit adapter
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain