Blind rivet, open, with break mandrel and flat head ISO 15981, dome head, aluminium/aluminium
ISO 15981 flat head aluminium/aluminium
RIV-ISO15981-ALU/ALU-(8,0-10,0)-4,8X14,0
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Plain aluminium
- Mandrel: Plain aluminium
The dimensions and tolerances defined in EN ISO 15981 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 4.8 x 14 mm |
Min./max. grip range | 8.0-10.0 mm |
Head diameter (dk) | 10.1 mm |
Head height (k1) | 2 mm |
Min./max. drill hole diameter | 4.9-5.0 mm |
Shear-fracture load | 1160 N |
Tensile fracture load | 1420 N |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Drill hole diameter | 4.9 mm |
Standards | ISO 15981 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 3.05 mm |
Last viewed
Hammer tacker magazine ST 11 Ergonomic
Button cell display, unequipped For clean and orderly storage of blister-packed button cells
1/4-inch bit drill holder
Combination wrench, inch with POWERDRIV®
Swivel hoist ring QC 8
Silicone sealant, food-grade
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Retaining spring For pneumatic chipping hammers
1/4" socket wrench insert For hexagon socket, metric
Hand Sanding Blocks with Extraction