Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
ISO 15977-L flat head aluminium/steel zinc plated
RIV-ISO15977-L-ALU/ST-(13,-15,0)-3,2X18
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Aluminium AlMg 2.5
- Mandrel: Zinc-plated steel, blue passivated (A2K)
The dimensions and tolerances defined in EN ISO 15977-L must be observed.
Tensile forces and shear forces in line with ISO 15977 class L
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 3.2 x 18 mm |
Min./max. grip range | 13.0-15.0 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 3.3-3.4 mm |
Shear-fracture load | 500 N |
Tensile fracture load | 700 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 3.3 mm |
Standards | ISO 15977 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.0 mm |
Last viewed
Ceramic abrasive grain flap wheel
Twist drill bit HSS DIN 338 type RN 118°
HSS annular cutter
Nova Pro Scala rear panel holder for sink H186 for all Nova Pro Scala extensions
1/2 inch socket wrench insert metric, hexagon, short
pias® drilling screw, flat head with AW drive
Double securing shackle FIXB 227 With pre-assembled 27 mm nail type HN 101
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Point chisel with SDS-plus drive arbour
Flap fitting Kinvaro T 71