Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(8,5-10,5)-4,0X14
Register now and access more than 125,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4 mm |
Length (l1) | 14 mm |
Head diameter (dk) | 8.4 mm |
Head height (k1) | 1.7 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 8.5-10.5 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 850 N |
Tensile fracture load | 1200 N |
Nominal diameter x length (Ø d x l) | 4 x 14 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Double-jointed socket wrench
Quick-action chuck Metal sleeve
Side stabiliser Nova Pro
Halogen-free threaded connector LH IP67
Spray bottle
Fleece Segmented Grinding Disc For direct use on angle grinders
Twist drill bit HSCo DIN 338 type RN oxide
1/4 inch socket wrench insert, metric short
Pulling tabs combination assortment
System case 4.4.2