Blade connector Uninsulated
Blade connector
TABCON-DTN-(SN)-6,3X0,8-(4,0-6,0SMM)
Register now and access more than 125,000 products
Datasheets(X)
Design | Unsealed |
Min./max. wire cross section | 4.0-6.0 mm² |
Nominal size of flat plug/push connector/blade connector | 6.3 x 0.8 mm |
Number of locking lugs | 1 PCS |
Diameter of hole | 1.65 mm |
Material | Brass |
Surface | Tin plated |
Last viewed
PU pneumatic spiral hose set 2000 series
Locking bolt with locking groove and fine thread
Swivel sleeve For manual riveting tool
1/2 inch impact socket wrench insert hexagon, metric, short
Halogen-free threaded connector LH IP67
Clip connector For wall and ceiling sander WSS 225-E Compact
Fixanchor internal thread W-FAZ-IG/S - push-through installation
Silicone fluid silicone spray
Diamond tile wet core bit With 1/4 inch hexagon bit mount
Cartridge Adjustable for wire stripping pliers