Bitumen sealant

Name: Bitumen sealant
Brand: Würth
SKU: 0890103100

Bitumen sealant
BITUSEAL-310ML

Art.-no. 0890103100

EAN 4065233063518

All versions

Prices for customers after login

Bitumen sealant

Art.-no. 0890103100

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

For sealing joints between bitumen strips

Excellent adhesion on bitumen sheeting, seals roofing sheets and roofing felt very securely

Good adhesion to damp base materials

Use largely unaffected by the weather

Suitable for emergency repairs

Ageing and weather-resistant

Suitable for elastic moulding

Notice

Repairs performed in damp conditions must be checked when dry

Sufficient air exchange should be ensured during the curing phase

A higher coating thickness extends the curing time

Do not coat with solvent-based paints

Suitable only for plastics without plasticisers

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For filling bitumen strips and their connections

For filling roof passages, e.g. domed roof lights, ventilation ducts, antennas or chimneys, as well as edge connections

Instructions

The surface must be load-bearing, clean, dry and free from grease, rust and water

An adhesion primer, e.g. with Silicone primer, improves the adhesion for absorbent or porous surfaces

Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.

Contents	310 ml
Container	Cartridge
Chemical basis	Bitumen
Density	1.38 g/cm³
Colour	Black
Smell/fragrance	Characteristic
Continuous motion absorption	10 %
Full curing speed	1 mm/d
Fully hardening/curing conditions	23°C and 50% relative humidity
Fungicidal properties	No
Min. skin-formation time	30 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Min. temperature resistance	-35 °C
Max. temperature resistance	80 °C
Min. processing temperature	1 °C
Max. processing temperature	30 °C
Recoatable/Can be painted over	No
Shelf life from production	36 Month

Additive article:

Product

Description

Quantity

Price
/PU

Cartridge cutter

CARTKNFE

Art.-no. 071566 09

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).