Backing pads for discs
Hook-and-loop fastener adhesive backing pad soft M14
ADHDISC-SNDDISC-M14-MEDIUM-D115
Register now and access more than 125,000 products
- Hook-and-loop fastener and adhesive resistant to high temperatures.
- The height of the hook-and-loop creates a layer of air between the backing pad and the velour of the disc, preventing it from overheating.
- Intermediate foam layer.
- This allows better adaptation of the disc to the surface, creating a more uniform finish.
- Attachment with M14 system.
- Backing pads can be changed quickly and easily.
Datasheets(X)
1. Remove the weld bead with fine ceramic hook-and-loop discs and a hard backing pad.
2. Level off the surface with a coarse Polish Fine HP disc and a medium backing pad.
3. Finely sand with a fine Polish Fine HP disc and soft backing pad.
4. Final finish.
Diameter (Ø) | 115 mm |
Last viewed
Snap ring shape SB for drill hole
Plastic carry bag For CLL 18, CLLG 18 and PLL 18
Washing brush
Screwdriver for hexagon drive with flexible shaft
Storage box (empty)
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
WIT 380/420 ml coaxial gun
Fabric sanding belt Zirconia alumina electric grinding file
Job+ Longsleeve
Spot separating chisel For pneumatic chipping hammers