Backing pads for discs
Hook-and-loop fastener adhesive backing pad hard M14
ADHDISC-SNDDISC-M14-HARD-D115
Register now and access more than 125,000 products
- For optimal application. The backing pads are designed according to their application (roughing, sanding and polishing).
- Hook-and-loop fastener and adhesive resistant to high temperatures.
- The height of the hook-and-loop creates a layer of air between the backing pad and the velour of the disc, preventing it from overheating.
- Intermediate foam layer.
- This allows better adaptation of the disc to the surface, creating a more uniform finish.
- Attachment with M14 system.
- Backing pads can be changed quickly and easily.
Datasheets(X)
1. Remove the weld bead with fine ceramic hook-and-loop discs and a hard backing pad.
2. Level off the surface with a coarse Polish Fine HP disc and a medium backing pad.
3. Finely sand with a fine Polish Fine HP disc and soft backing pad.
4. Final finish.
Diameter (Ø) | 115 mm |
Last viewed
Brake line nipple, type B 5.0
Thread cutting tool set HSS M3-M12 44 pcs in system case 8.4.1
Ejector pin For metal annular cutters
Pressure screw For Basic quick-action clamp
Turnbuckle sleeve, open form DIN 1480 (open shape), A4 stainless steel
Angled adapter for 1-component combi foam STF
Machinists' hammer with protective handle sheath
Tapping and chipping hammer BMH 45-XE
Half-shell pin crimping insert
ELMO® device screw