BP-S-H/TZN post support bracket
Post holder, BP-S-H/TZN
POSTHOLD-CONCA-HDG-SWORD110-(H200-270)
Register now and access more than 125,000 products
- Height can be adjusted when installed
- Concealed support connection through internal blade mount
- To set in concrete
- High load-bearing capacity due to robust 42 mm tubular spike and large pressure plate
- Highly variable height compensation
- High longevity due to subsequent thermal hot-dip zinc-plating
- Material: Steel
- Surface: Full hot-dip zinc-plating
Diameter of dowel pin may only be max. 1 mm smaller than the diameter of the hole.
Secure anchorage of the post support bracket in the substrate or ground must be separately verified.
Datasheets(X)
For fixing posts of heavy wooden structures into the foundation.
Anchored by embedding directly in concrete or using a sleeve foundation.
Recommended concrete embedding depth: approx. 150 mm
Suitable fasteners:
Dowel pins: d = 8 mm
Design | For static purposes |
Form | Blade shape |
Strut dimensions | 70 x 110 x 8 mm |
Diameter of hole | 9 mm |
Holder plate dimensions | 100 x 80 x 8 mm |
Length | 332 mm |
Type description | VRS 1 |
Unextended height | 222 mm |
Required steel dowels | 4 piece, diameter 8 mm |
Suitable for min. post cross-section | 80 x 100 mm |
Baseplate format | 60 x 60 x 4 mm |
Length of rowlock (concrete) | 200 mm |
Diameter of rowlock (concrete) | 42 mm |
Number of D 9 mm holes | 4 PCS |
Material | Steel |
Surface | Hot dip galvanized |
Use class | 3 |
Min. recommended depth of encasement in concrete | 150 mm |
Number of pieces | 2 PCS |
Weight | 2099 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!