Automatic hand dryer HEPA stainless steel satin finish 800 W
Hand dryer stainless steel automatic
HNDDRYR-EL-SENSOR-HEPA-INOX-SATIN-800W
Register now and access more than 125,000 products
- Automatic electronic hand dryer.
- Electronic infrared sensor. Ideal for low energy consumption.
- HEPA filter to retain contaminants and particles, can be replaced without removing the housing.
- Installation type: wall. Includes hardware and bolts.
- 1.2 mm stainless steel housing made in one piece.
- Suitable for communal areas and places with high frequency of use.
- Robust, anti-theft and secure. Constructed without sharp edges or other hazardous elements.
- Air temperature (ambient temperature of 20°): 40°C at 10 cm.
- Universal brushless motor. No maintenance required.
- Thermostat overheating resistance (automatic reset).
- Double safety thermal fuse calibrated at 133°C.
- Estimated drying time: 10-12 seconds.
- Distance to sensor: 0-20 cm without possibility of adjustment.
- In accordance with European safety directives (EC).
Datasheets(X)
Suitable for use in busy areas such as hospitals, hotels, restaurants, schools and colleges, shopping centres etc.
Operation
Place your hands under the hand dryer to automatically start operation.
The hand dryer remains in operation as long as the hands are within the sensor field.
The appliance switches off a few seconds after hands are removed.
Cleaning
Cleaning with a cotton cloth slightly moistened with soap is recommended. Then dry.
The filter should be changed every three months.
Min./max. blower temperature | 40 to 40 °C |
Min./max. air current | 2660-2660 l/min |
| Technical data | |
| Voltage/Frequency | 220-240 V ∼ 50/60 Hz |
| Power | 800 W |
| Engine power | 800 W |
| Engine speed | 35,000 rpm |
| Air velocity | 305 km/h |
| Max. consumption | 3.5 A |
| IEC protection class | Class l |
| Protection rating | IPX1 |
| Noise level at 2 m | 72 dBA |
| Dimensions | 164 x 151 x 327 mm |
| Weight | 4.7 kg |
Last viewed
Chipboard screw Wüpofast ® 2.0
RALI® plane 220
Metric combination wrench with POWERDRIV®
Universal connection piece for dust extraction
Cross-line laser CLG 18
Hearing protection adapter for hard hat
1/4" socket wrench insert metric, long
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
3/4-inch impact socket wrench insert hexagon, metric, short
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain