Assembly adhesive MS-SPEEDTACK 3400
Structural adhesive MS SPEEDTACK 3400
STRUCADH-(MS SPEEDTACK 3400)-WHITE-290ML
Register now and access more than 125,000 products
Features
- Instant 3 second tack, high initial force and a final strength of 400 T/m2.
- Sealant and adhesive, can be used to seal overlapping joints and bonding adhesive between different materials.
- Especially suitable for attaching friezes, skirting boards, flashings, mouldings, plasterboard, profiles, decorative panels, battens, worktops and accessories, and for assembling and repairing furniture. Concrete, brick, wood, exposed brick, natural or artificial stone, ceramic tiles, glass, aluminium, iron, zinc, galvanised surfaces and most thermoplastic plastics, except PE, PTFE and thermosetting.
Advantages
- High resistance to premature ageing.
- Interior and exterior use.
- Does not yellow.
- Highly UVA-resistant.
- Does not shrink and has a low odour.
Benefits
- Its high initial tack allows the assembler to assemble parts quickly and efficiently.
- Can be used both indoors and outdoors with guaranteed results.
- Its low odour prevents fatigue during application.
Tensile strength is a product of the contact surface of the product on the bonding surfaces and not of the total surface of the surfaces.
Due to the large number of paints on the market, test before painting to check their compatibility.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Clean and degrease the surfaces to be joined and open the pores if the surfaces so permit.
Slightly moisten surfaces to aid curing. Apply beads vertically or horizontally without closing the air passage between them to promote curing. Apply pressure to join the parts. Can be painted wet on wet once a skin has formed, approx. 8 minutes after application and maximum 1 hour. If used as a sealant, apply a continuous bead avoiding the formation of air pockets. Smooth with water or a chemical smoother art. no. 0893003.
Contents | 290 ml |
Container | Cartridge |
Chemical basis | MS polymer |
Colour | White |
Density/conditions | 1486.7 kg/m³ / at 20°C |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -40 to 90 °C |
Shelf life from production/conditions | 18 Month / storage in a dry place protected from light, 5°C to 40°C |
| Technical data | |
| Yield per cartridge, m² | Approx. 2 |
| Density, g/ml | 1,44 |
| Yield in linear metres per cartridge dia. 10 | 8-10 |
| Tensile strength, T/m2 DIN 53504 | 400 |
| Tensile strength, N/mm2 DIN 53504 | 4 |
| Drying time, mm every 24 h | 3 (50 % minimum humidity and at 20ºC) |
| Chemical resistance | Water, aliphatic solvents, diluted inorganic acids, alkalis, oils and fats. Low resistance to aromatic solvents, concentrated acids and chlorinated hydrocarbons. |
| Isocyanates and solvents | None |
| Declaration of Performance (DoP) | EN 15651-1:2012 -Internal/external façades |
Last viewed
Knife blade, straight, long, toothed
VDE heavy-duty side cutters DIN ISO 5749, IEC 60900
Plus Quadro-L Vario hammer drill bit
Carro 3 MOTION WÜRTH
System box
Caulking gun up to 300 ml 14:1
3/8-inch socket wrench insert, metric long
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Paper roll
MFD-S multi-purpose drill bit with straight shank