Assembly adhesive MS-CRISTALCLEAR 3150
Structural adhesive CRISTAL CLEAR
STRUCADH-(CRISTAL CLEAR 3150)-290ML
Register now and access more than 125,000 products
Features
- Instant tack in 3 seconds with high initial force and a final strength of 150 T/m².
- Sealant and adhesive, can be used to seal overlapping joints and as bonding adhesive between different materials.
- High elasticity.
- Especially suitable for sealing glass, aluminium and wood carpentry, powder-coated aluminium, interior-exterior sealing joints, tiles, concrete, steel, zinc, copper. Also for use with thermoplastics (except polyethylene or PTFE) and thermoset plastics. Paint enamels. Brick, natural or artificial stone, ceramic, most thermoplastics, except PE and PTFE, and thermoset plastics.
Advantages
- Exceptional resistance to premature ageing.
- Does not yellow indoors or outdoors.
- Ideal for sealing façade/window frame joints, window frames, glass and sanitary installations.
- Highly UVA-resistant.
- Does not shrink and has a low odour.
Benefits
- Its high initial tack allows the assembler to assemble parts quickly and efficiently.
- Can be used both indoors and outdoors with guaranteed results.
- Its low odour prevents fatigue during application.
Tensile strength is a product of the contact surface of the product on the bonding surfaces and not of the total surface of the surfaces.
Due to the large number of paints on the market, test before painting to check their compatibility.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Clean and degrease the surfaces to be joined and open the pores if the surfaces so permit. Slightly moisten surfaces to aid curing.
Apply beads vertically or horizontally without closing the air passage between them to promote curing. Apply pressure to join the parts.
Can be painted wet on wet once a skin has formed, approx. 10-15 minutes after application and up to a maximum of 1 hour.
If used as a sealant, apply a continuous bead, avoiding the formation of air pockets. Smooth with water or chemical smoother PR01_0893003.
Contents | 290 ml |
Container | Cartridge |
Chemical basis | MS hybrid polymer |
Colour | Transparent |
Min./max. skin-formation time | 4-6 min |
Density/conditions | 1.07 g/ml / according to SQP006-3 V.1 (density determination by pycnometer, standard 20°C) |
Shore hardness A/conditions | 40 +/- 3 / in accordance with DIN 53505 |
Min. wet skin-formation time/conditions | 4 min/ at 23°C and 50% relative humidity |
Min. dry skin-formation time/conditions | 4 min / at 23°C and 50% relative humidity |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -40 to 90 °C |
Max. short-term temperature resistance | 90 °C |
Short term temperature resistance max. /conditions | 90 °C / in cured state |
Min. skin-formation time | 4 min |
Conditions for tensile strength | in accordance with DIN 53504 |
Elongation at break/conditions | 300 % / in accordance with DIN 53504 |
Breaking elongation conditions | in accordance with DIN 53504 |
Shelf life from production/conditions | 12 Month / storage dry, dust-free and protected from light, max. 25°C |
Silicone-free | Yes |
Solvent-free | Yes |
PVC-free | Yes |
VOC-free | Yes |
Isocyanate-free | Yes |
Ultraviolet resistance | Good |
Sustainability | Environment |
| Technical data | |
| Chemical base | MS hybrid polymer |
| Application temperature, °C | 5 to +40 |
| Shore A hardness (DIN EN ISO 868) | 40 |
| Skin formation at 20 °C, min | 5 |
| Temperature resistance, °C | -40 to +90 |
| Yield per cartridge, m² | 2 |
| Elongation at break (DIN EN ISO 53504), % | 300 |
| Density, g/cm³ | 1,07 |
| Yield in linear metres per cartridge dia. 10 | 8-10 |
| Tensile strength (DIN 53504), T/m² | 150 |
| Tensile strength (DIN 53504), N/mm² | 1,5 |
| Drying time, mm every 24 h | 2,5 |
| Chemical resistance | Water, aliphatic solvents, diluted inorganic acids, alkalis, oils and fats. Low resistance to aromatic solvents, concentrated acids and chlorinated hydrocarbons. |
| Isocyanates and solvents | None |
| Declaration of Performance (DoP) | EN 1565-1/2/3: 2012 - Internal/external façades - Glazing - Sanitary areas |
Last viewed
Knee pads
Hose coupling hose piece
Hexagon bolt with shank ISO 4014, steel 10.9, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Rechargeable battery Li-ion 18 V BASIC M-CUBE
Universal cleaner R1
Shim ring DIN 988, steel, plain
Aluminium wheel rim cleaner
Stretch X S3 safety shoe
Hexagon head cover cap GPN 1000