Arrow-shaped drill bit for drilling through porcelain
Multi-purpose drill bit anti-rotation system
DRL-GENPURP-D5-L85-WL50MM
Art.-no. 0641030500
EAN 4045989700806
Register now and access more than 125,000 products
- Minimal cooling.
- Wet the drill bit every (approx.) 5 seconds of operation.
- Four cutting faces.
- Its sharp tip means that it does not slip on the material to be drilled.
- If it becomes too worn down for porcelain drilling, it can be used on other softer materials.
- Only in drill mode, NO PERCUSSION DRILLING.
- Use a wooden support when drilling loose parts.
- Depth stop for drilling tile only (not concrete or brick).
• It is recommended to use the SB 13-XE hammer drill on speed setting 1.
• For an increased service life, the drill bit can be used with a constant flow of water.
Datasheets(X)
Diameter (Ø) | 5 mm |
Length | 85 mm |
Working length | 50 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
1-inch impact socket wrench insert hexagon, metric, long
Probe set for UBS cup gun 3 pieces
3/8 inch socket wrench insert metric, hexagon, short
Wire holder For wiring duct VKW standard
Silicone spray
Hard-pressed compact fleece disc
Non-woven abrasive reinforced For pipe sanding system
HSS replacement drill bit for centre drill bits
Mandatory sign
Aluminium telescopic shaft with water drain 1/2 inch to 3/4 inch hose connection