Apparatus castor with fixed holder
Fixed machinery castor with fixed holder
FIXMACSTR-SCRONPLT-D200-230KG
Register now and access more than 125,000 products
- Friction bearing hub
- Does not damage flooring
- Strength: 83±5 Shore A
- Rim comprises two sheet steel discs, riveted and electrogalvanised
- Low noise
- Low roll resistance
- Application temperature: -20°C to +60°C
- Housing made of electrolytically galvanised sheet steel
- Double ball collar with grease lubrication
- Dust protection ring
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For damp environments. Resistant to diluted acids. Not resistant to organic solvents and oils. These castors are used e.g. for workshop and assembly trolleys, load rollers, service trolleys, roller boards and waste containers.
 | |
Roll diameter (D) | 200 mm |
Load capacity | 230 kg |
Height (H) | 240 mm |
Roll width (L) | 50 mm |
Hole distance (a) | 105 mm |
Hole distance 2 (b) | 80 mm |
Elongated hole width (c) | 11 mm |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 60 °C |
Last viewed
PE backfill sealant
Hand tap, second tap HSS DIN 352
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
TX bit C 6.3 (1/4 inch) with hole
Metric double box-end wrench with POWERDRIV®
Occupational shoe Ultra X OBE
Hydraulic lifting jack Heavy-duty design
1/4 inch socket wrench insert, metric short
SEG 10 COMPACT spray extraction device
Dispenser system