Aluminium wheel rim cleaner

Name: Aluminium wheel rim cleaner
Brand: Würth
SKU: 089010205

Aluminium rim cleaner
RIMCLNR-ALU-CANISTER-5LTR

Art.-no. 089010205

EAN 4045989718160

All versions

Similar products

Prices for customers after login

Aluminium wheel rim cleaner

Art.-no. 089010205

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Acidic special cleaner for light-alloy wheel rims

Contains phosphoric acid

Removes even the most stubborn brake dust deposits, as well as tar splashes and other difficult to remove contamination

Economical to use

Saves time and money

If used regularly, the original appearance is restored. The build-up of new soiling is prevented.

AOX and silicone-free

Notice

Use only on light-alloy wheel rims. Do not use on hot wheel rims or in direct sunlight. Do not spray on vehicle paint, chrome, highly polished aluminium, plastic or other surfaces.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For gentle cleaning of light-alloy wheel rims

Instructions

Spray wheel rims to be cleaned fully and evenly. Particularly with stubborn dirt or rough surfaces, the cleaning effect can be increased by using the Würth hand brush or sponge. Do not exceed the application time of 30 seconds. With unpainted aluminium wheel rims, carry out a thorough material compatibility check in an invisible area.

Contents	5 l
Weight of content	5.7 kg
Container	Canister
Chemical basis	Phosphoric acid, non-ionic surfactants
Smell/fragrance	Characteristic
Colour	Colourless
pH value / conditions	1 / at 20°C
Min. flashing point	38 °C
Density/conditions	1.14 g/cm³ / at 20°C
Shelf life from production	24 Month
AOX-free	Yes
Silicone-free	Yes
Free of phosphoric acid	No
Bio-degradable	Yes

Additive article:

Product

Description

Quantity

Price
/PU

Tap DN 45 thread for 5 l and 10 l plastic canisters

TAP-(F.PLACANI-5LTR)

Art.-no. 089130201

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.

x 1 pcs

Hand brush

HNDBRSH-130X340MM

Art.-no. 0891350102

Car brush with ergonomic, comfortable handle for effective and simple cleaning of all surfaces

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 4

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.