Aluminium/plastic free-standing ladder with steps with platform
STANDLDR-ALU/PLA-PLTFORM-4STEP
Art.-no. 096297478
EAN 4045989762996
Register now and access more than 125,000 products
- Extra-large platform with textured surface for safe and comfortable working, even over longer periods
- Steps up to 125 mm deep and textured for a high level of safety and comfortable, secure footing
- Practical storage areas in the safety bar for screwdrivers and consumables.
- Large storage tray for power tools, tools and consumables as well as two covered drawers for small parts.
- The safety system on the platform locks automatically to prevent the free-standing ladder from collapsing while working.
- Handle at the optimal carrying point for easy and ergonomic handling.
- The integrated locking system in the handle holds the side rails together securely during transport.
- Specially shaped side rails made of extruded aluminium profile provide high torsion resistance and stability.
- The anodised side rail surfaces increase the durability of the ladder and prevent hands from becoming dirty during use.
- The non-slip plastic feet ensure secure footing and are easy to replace.
Datasheets(X)
Material | Aluminium / polypropylene |
Surface | Anodised |
Number of steps (including platform) | 1 x 4 |
Length | 2.07 m |
Width (bottom)/width (top) | 0.60/0.44 m |
Step depth | 130 mm |
Stand area according to TRBS 2121-2 | Yes |
Platform height | 1.00 m |
Platform dimension | 420 x 400 mm |
Stride length | 1.08 m |
Height, vertical | 1.82 m |
Load capacity | 150 kg |
Stand height | 1.00 m |
Working height | 2.50 m |
Reaching height | 3.00 m |
Weight | 13.8 kg |
Standards | EN 131 |
Last viewed
Lid holder for rolling tool cases
Thin-walled heat-shrink hose shrink rate 2:1 without internal adhesive
Double box-end wrench set, metric 12 pcs
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
A 507 Click door handle
Multi-purpose insert for hat/coat hooks
Jointed-head ratchet 1/4"
Work T-shirt ESD
Wire brush with wooden body
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies